CT1035
We manufacture a variety of condensate tanks. Many of our tanks are replacing existing leaking units that were designed without corrosion allowance. We begin with a 1/4-inch minimum thickness on all sizes of condensate receiver and often use 3/8-inch thickness. When buying a system with pumps, motors, or gauges, don’t forget that the tank is an integral part of the system. You can protect your system by buying a tank with corrosion allowance from Midwest Tank Co.
| Specifications | |
|---|---|
| Capacity | 1035 |
| Length (A) | 11′-0″ |
| Diameter | 4′-0″ |
| Dim. (C) | 6′-1/2″ |
| Dim. (D) | 4′-0″” |
| Dim. (E) | 12 in |
| Low Pressure Return (F) | 4 in |
| Dim. (G) | 2 1/2 in |
| Dim. (H) | 3 in |
| Hi Pressure Return (I) | 2 1/2 in |
| Dim. (J) | 3 in |
| Tank Heater (K) | 2 1/2 in |