We manufacture a variety of condensate tanks. Many of our tanks are replacing existing leaking units that were designed without corrosion allowance. We begin with a 1/4-inch minimum thickness on all sizes of condensate receiver and often use 3/8-inch thickness. When buying a system with pumps, motors, or gauges, don’t forget that the tank is an integral part of the system. You can protect your system by buying a tank with corrosion allowance from Midwest Tank Co.
|Dim. (E)||8 in|
|Low Pressure Return (F)||4 in|
|Dim. (G)||2 in|
|Dim. (H)||2 in|
|Hi Pressure Return (I)||1 1/4 in|
|Dim. (J)||2 in|
|Tank Heater (K)||1 1/4 in|