CT750, Condensate Tanks

CT750
We manufacture a variety of condensate tanks. Many of our tanks are replacing existing leaking units that were designed without corrosion allowance. We begin with a 1/4-inch minimum thickness on all sizes of condensate receiver and often use 3/8-inch thickness. When buying a system with pumps, motors, or gauges, don’t forget that the tank is an integral part of the system. You can protect your system by buying a tank with corrosion allowance from Midwest Tank Co.
Specifications
Capacity 750
Length (A) 8′-0″
Diameter 4′
Dim. (C) 4′
Dim. (D) 2′-6″
Dim. (E) 12 in
Low Pressure Return (F) 4 in
Dim. (G) 2 1/2 in
Dim. (H) 3 in
Hi Pressure Return (I) 2 in
Dim. (J) 2 in
Tank Heater (K) 2 in